Volume 14.03 Temperature Measurement

Section 14 - General Methods and Instrumentation

Volume 14.03, July 2005

Temperature Measurement

E0001-03A Specification for ASTM Liquid-in-Glass Thermometers

E0077-98R03 Test Method for Inspection and Verification of Thermometers

E0100-03 Specification for ASTM Hydrometers

E0126-92R98 Test Method for Inspection and Verification of Hydrometers

E0207-00 Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties

E0220-02 Test Method for Calibration of Thermocouples By Comparison Techniques

E0230-03 Specification and Temperature-Electromotive Force (EMF) Tables for Standardized Thermocouples

E0235-03 Specification for Thermocouples, Sheathed, Type K and Type N, for Nuclear or for Other High-Reliability Applications

E0344-02 Terminology Relating to Thermometry and Hydrometry

E0452-02 Test Method for Calibration of Refractory Metal Thermocouples Using a Radiation Thermometer

E0563-02E01 Practice for Preparation and Use of an Ice-Point Bath as a Reference Temperature

E0574-00 Specification for Duplex, Base Metal Thermocouple Wire With Glass Fiber or Silica Fiber Insulation

E0585_E0585M-04 Specification for Compacted Mineral-Insulated, Metal-Sheathed, Base Metal Thermocouple Cable

E0601-81R97 Test Method for Comparing EMF Stability of Single-Element Base-Metal Thermocouple Materials in Air

E0608_E0608M-00R04 Specification for Mineral-Insulated, Metal-Sheathed Base Metal Thermocouples

E0644-04 Test Methods for Testing Industrial Resistance Thermometers

E0667-98R03 Specification for Mercury-in-Glass, Maximum Self-Registering Clinical Thermometers

E0696-00 Specification for Tungsten-Rhenium Alloy Thermocouple Wire

E0710-86R97 Test Method for Comparing EMF Stabilities of Base-Metal Thermoelements in Air Using Dual, Simultaneous, Thermal-EMF Indicators

E0780-92R98 Test Method for Measuring the Insulation Resistance of Sheathed Thermocouple Material at Room Temperature

E0825-98R03 Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature

E0839-96 Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Material

E0879-01 Specification for Thermistor Sensors for Clinical Laboratory Temperature Measurements

E0988-96R02 Temperature-Electromotive Force (EMF) Tables for Tungsten-Rhenium Thermocouples

E1061-01 Specification for Direct-Reading Liquid Crystal Forehead Thermometers

E1104-98R03 Specification for Clinical Thermometer Probe Covers and Sheaths

E1112-00 Specification for Electronic Thermometer for Intermittent Determination of Patient Temperature

E1129_E1129M-98R02 Specification for Thermocouple Connectors

E1137_E1137M-04 Specification for Industrial Platinum Resistance Thermometers

E1159-98R03 Specification for Thermocouple Materials, Platinum-Rhodium Alloys, and Platinum

E1256-95R01 Test Methods for Radiation Thermometers (Single Waveband Type)

E1299-96R02 Specification for Reusable Phase-Change-Type Fever Thermometer for Intermittent Determination of Human Temperature

E1350-97R01 Guide for Testing Sheathed Thermocouples Prior to, During, and After Installation

E1502-98R03E01 Guide for Use of Freezing-Point Cells for Reference Temperatures

E1594-99 Guide for Expression of Temperature

E1652-03 Specification for Magnesium Oxide and Aluminum Oxide Powder and Crushable Insulators Used in the Manufacture of Metal-Sheathed Platinum Resistance Thermometers, Base Metal Thermocouples, and Noble Metal

Thermocouples

E1684-00 Specification for Miniature Thermocouple Connectors

E1750-02 Guide for Use of Water Triple Point Cells

E1751-00 Guide for Temperature Electromotive Force (EMF) Tables for Non-Letter Designated Thermocouple Combinations

E1965-98R03 Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature

E2181_E2181M-01 Specification for Compacted Mineral-Insulated, Metal-Sheathed, Noble Metal Thermocouples and Thermocouple Cable

E2251-03A Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids