Volume 03.05 Analytical Chemistry for Metals, Ores, and Related Materials

Section 03 - Metals Test Methods and Analytical Procedures

Volume 03.05, October 2005

Analytical Chemistry for Metals, Ores, and Related Materials

E0032-86R01 Practices for Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition

E0034-94R02 Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys

E0035-88R02 Test Methods for Chemical Analysis of Magnesium and Magnesium Alloys

E0037-00 Test Methods for Chemical Analysis of Pig Lead

E0050-00R05 Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials

E0053-02 Test Method for Determination of Copper in Unalloyed Copper by Gravimetry

E0055-91R01 Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition

E0060-98R04 Practice for Analysis of Metals, Ores, and Related Materials by Molecular Absorption Spectrometry

E0062-89R04 Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods)

E0075-76R04 Test Methods for Chemical Analysis of Copper-Nickel and Copper-Nickel-Zinc Alloys

E0076 Test Methods for Chemical Analysis of Nickel-Copper Alloys

E0088-91R01 Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition

E0106-83R04 Test Methods for Chemical Analysis of Copper-Beryllium Alloys

E0107 Test Methods for Chemical Analysis of Electronic Nickel

E0115 Practice for Photographic Processing in Optical Emission Spectrographic Analysis

E0116 Practice for Photographic Photometry in Spectrochemical Analysis

E0118-89R04 Test Methods for Chemical Analysis of Copper-Chromium Alloys

E0120 Test Methods for Chemical Analysis of Titanium and Titanium Alloys

E0121-83R04 Test Methods for Chemical Analysis of Copper-Tellurium Alloys

E0130-87R03 Practice for Designation of Shapes and Sizes of Graphite Electrodes

E0135-05 Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials

E0158 Practice for Fundamental Calculations to Convert Intensities into Concentrations in Optical Emission Spectrochemical Analysis

E0227 Test Method for Optical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys by the Point-to-Plane Technique

E0246-01R05 Test Methods for Determination of Iron in Iron Ores and Related Materials by Dichromate Titration

E0247-01R05 Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry

E0248-02 Test Method for Determination of Manganese in Manganese Ores by Pyrophosphate Complexed Permanganate Potentiometric Titrimetry

E0255-02 Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition

E0276-03 Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Finer for Metal-Bearing Ores and Related Materials

E0278-01R05 Test Method for the Determination of Phosphorus in Iron Ores by Phosphomolybdate Coprecipitation and Nitric Acid Titrimetry

E0279-97R05 Test Method for Determination of Abrasion Resistance of Iron Ore Pellets and Sinter by the Tumbler Test

E0305 Practice for Establishing and Controlling Spectrochemical Analytical Curves

E0314-00 Test Methods for Manganese in Iron Ores

E0315-04 Test Methods for Chemical Analysis of Molybdenum

E0316-00 Test Method for Determination of Iron in Manganese Ores by Hydrogen Sulfide Reduction-Dichromate Titration

E0322-96R04 Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels and Cast Irons

E0342-04 Test Method for Determination of Chromium Oxide in Chrome Ores by Permanganate Titrimetry

E0350-95R05 Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron

E0351-93R00E01 Test Methods for Chemical Analysis of Cast Iron\MAll Types

E0352-93R00E01 Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels

E0353-93R00E01 Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys

E0354-93R00E01 Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys

E0360-96R01 Test Methods for Chemical Analysis of Silicon and Ferrosilicon

E0361 Test Methods for the Determination of Arsenic and Lead in Ferromanganese

E0362 Test Methods for the Determination of Arsenic and Lead in Silicomanganese and Ferrosilicon Manganese

E0363-83R03E01 Test Methods for Chemical Analysis of Chromium and Ferrochromium

E0364-94R00 Test Methods for Chemical Analysis of Ferrochrome-Silicon

E0365 Test Method for the Determination of Vanadium in Ferrovanadium and Vanadium Alloying Additives

E0367-03 Methods for Chemical Analysis of Ferroniobium

E0371-00 Test Method for the Determination of Boron in Ferroboron

E0372-01 Test Method for Determination of Calcium and Magnesium in Magnesium Ferrosilicon

E0378 Test Method for Spectrographic Analysis of Silver by the Powder Technique

E0382-02 Test Method for Determination of Crushing Strength of Iron Ore Pellets

E0389-03 Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Coarser for Metal-Bearing Ores and Related Materials

E0395-02 Test Method for Determination of Total Sulfur in Iron Ores and Related Materials by Combustion-Iodate Titration

E0396-05 Test Methods for Chemical Analysis of Cadmium

E0400-02 Test Method for Analysis of Ores, Minerals, and Rocks by Fire Assay Preconcentration Atomic Emission Spectrometry

E0402-02 Test Method for Spectrographic Analysis of Uranium Oxide (UO) by Gallium Oxide-Carrier Technique

E0404-95R00E01 Test Method for Spectrographic Determination of Boron In Carbon and LowAlloy Steel by the Point-To-Plane Technique

E0406-81R03 Practice for Using Controlled Atmospheres in Spectrochemical Analysis

E0409 Practice for Description and Performance of the Microphotometer

E0415-99AR05 Test Method for Optical Emission Vacuum Spectrometric Analysis of Carbon and Low-Alloy Steel

E0416-98R04 Practice for Planning and Safe Operation of a Spectrochemical Laboratory

E0439-04A Test Methods for Chemical Analysis of Beryllium

E0463-03 Test Method for Silica in Fluorspar by the Silico-Molybdate Visible Spectrometry

E0465-00 Test Methods for Determination of Manganese (IV) in Manganese Ores by Redox Titration

E0478-03 Test Methods for Chemical Analysis of Copper Alloys

E0485-94R05 Test Method for Optical Emission Vacuum Spectrometric Analysis of Blast Furnace Iron by the Point-to-Plane Technique

E0507-03 Test Method for Aluminum in Iron Ores by Atomic Absorption Spectrometry

E0508-03 Test Method for Calcium and Magnesium in Iron Ores by Atomic Absorption Spectrometry

E0520-98R03 Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectrometry

E0536-05 Test Methods for Chemical Analysis of Zinc and Zinc Alloys

E0539-02 Test Method for X-Ray Emission Spectrometric Analysis of 6AI-4V Titanium Alloy

E0572-02A Test Method for Analysis of Stainless and Alloy Steels by X-ray Fluorescence Spectrometry

E0581-04E01 Test Methods for Chemical Analysis of Manganese-Copper Alloys

E0607-02 Test Method for Atomic Emission Spectrometric Analysis Aluminum Alloys by the Point to Plane Technique Nitrogen Atmosphere

E0634-96R01 Practice for Sampling of Zinc and Zinc Alloys for Optical Emission Spectrometric Analysis

E0716-94R02 Practices for Sampling Aluminum and Aluminum Alloys for Spectrochemical Analysis

E0738-00 Test Method for Determination of Aluminum in Iron Ores and Related Materials by Complexometric Titration

E0815-04 Test Method for Determination of Calcium Fluoride in Fluorspar by Complexometric Titration

E0826 Practice for Testing Homogeneity of Materials for Development of Reference Materials

E0841-04 Test Method for Determination of Copper in Iron Ores and Related Materials by Atomic Absorption Spectrometry

E0863 Practice for Describing Atomic Absorption Spectrometric Equipment

E0876 Practice for Use of Statistics in the Evaluation of Spectrometric Data

E0877-03 Practice for Sampling and Sample Preparation of Iron Ores and Related Materials

E0878-01R05 Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrometry

E0882-87R03 Guide for Accountability and Quality Control in the Chemical Analysis Laboratory

E0945-02A Test Method for Determination of Zinc in Zinc Ores and Concentrates by Complexometric Titrimetry

E1009-95R00 Practice for Evaluating an Optical Emission Vacuum Spectrometer to Analyze Carbon and Low-Alloy Steel

E1010-84R04 Practice for Preparation of Disk Specimens of Steel and Iron for Spectrochemical Analysis by Remelting

E1019-03 Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys

E1024 Guide for Chemical Analysis of Metals and Metal Bearing Ores by Flame Atomic Absorption Spectrophotometry

E1028 Test Method for Total Iron in Iron Ores and Related Materials by Dichromate Titrimetry

E1059-91R01 Practice for Designating Shapes and Sizes of Nongraphite Counter Electrodes

E1070-00 Test Method for Determination of Phosphorus in Iron Ores by Photometric Method

E1085-95R04 Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels

E1086-94R05 Test Method for Optical Emission Vacuum Spectrometric Analysis of Stainless Steel by Point-to-Plane Excitation Technique

E1097-03 Guide for Direct Current Plasma Emission Spectrometry Analysis

E1172-87R03 Practice for Describing and Specifying a Wavelength-Dispersive X-Ray Spectrometer

E1184-02 Practice for Electrothermal (Graphite Furnace) Atomic Absorption Analysis

E1251-04 Test Method for Analysis of Aluminum and Aluminum Alloys by Atomic Emission Spectrometry

E1257-93R03 Guide for Evaluating Grinding Materials Used for Surface Preparation in Spectrochemical Analysis

E1277-02 Test Method for Chemical Analysis of Zinc-5 \% Aluminum-Mischmetal Alloys by ICP Emission Spectrometry

E1282-98R04 Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials

E1306-94R04 Practice for Preparation of Metal and Alloy Samples by Electric Arc Remelting for the Determination of Chemical Composition

E1329-00R05 Practice for Verification and Use of Control Charts in Spectrochemical Analysis

E1335-04 Test Methods for Determination of Gold in Bullion by Cupellation

E1361-02 Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis

E1371-05 Test Method for Gravimetric Determination of Phosphorus in Phosphorus-Copper Alloys or Phosphorus-Copper-Silver Alloys

E1409-05 Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique

E1446-92R97E01 Test Method for Chemical Analysis of Refined Gold by Direct Current Plasma Emission Spectrometry

E1447-05 Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method

E1452 Practice for Preparation of Calibration Solutions for Spectrophotometric and for Spectroscopic Atomic Analysis

E1473-03 Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys

E1479-99R05 Practice for Describing and Specifying Inductively-Coupled Plasma Atomic Emission Spectrometers

E1507-98R03 Guide for Describing and Specifying the Spectrometer of an Optical Emission Direct-Reading Instrument

E1552-93R02 Test Method for Determining Hafnium in Zirconium and Zirconium Alloys Using the D-C Argon Plasma Spectrometer

E1568-03 Test Method for Determination of Gold in Activated Carbon by Fire Assay Gravimetry

E1569-03 Test Method for Determination of Oxygen in Tantalum Powder

E1587-05 Test Methods for Chemical Analysis of Refined Nickel

E1600-02 Test Method for Determination of Gold in Cyanide Solutions by Atomic Absorption Spectrometry

E1601-98R03E01 Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method

E1621-94R99 Guide for X-Ray Emission Spectrometric Analysis

E1622-94R99E01 Practice for Correction of Spectral Line Overlap in Wavelength-Dispersive X-Ray Spectrometry

E1659-00 Test Methods for Coating Weight and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet

E1691-95R01 Guide for Evaluation and Assessment of Analytical Chemistry Laboratories

E1724-95R01 Guide for Testing and Certification of Metal, Ore, and Metal-Related Reference Materials

E1763-98R03 Guide for Interpretation and Use of Results from Interlaboratory Testing of Chemical Analysis Methods

E1770-95R01 Practice for Optimization of Electrothermal Atomic Absorption Spectrometric Equipment

E1771-95R01 Test Method for Determination of Copper in Anode and Blister Copper

E1805-02 Test Method for Fire Assay Determination of Gold in Copper Concentrates by Gravimetry

E1806-96R01 Practice for Sampling Steel and Iron for Determination of Chemical Composition

E1812 Practice for Optimization of Flame Atomic Absorption Spectrometric Equipment

E1831 Guide for Preparing Certificates for Reference Materials Relating to Chemical Composition of Metals, Ores, and Related Materials

E1832 Practice for Describing and Specifying a Direct Current Plasma Atomic Emission Spectrometer

E1833-96R01 Practice for Sampling of Blister Copper in Cast Form for Determination of Chemical Composition

E1834-96R02 Test Method for Determination of Lead in Nickel Alloys by Electrothermal Atomic Absorption Spectrometric Method

E1835-96R02 Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry

E1852-96R01 Test Method for Determination of Low Levels of Antimony in Carbon and Low-Alloy Steel by Electrothermal Atomic Absorption Spectrometry

E1898-02 Test Method for Determination of Silver in Copper Concentrates by Flame Atomic Absorption Spectrometry

E1914-98R03 Practice for Use of Terms Relating to the Development and Evaluation of Methods for Chemical Analysis

E1915-01 Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry

E1916-97R04 Guide for Identification and/or Segregation of Mixed Lots of Metals

E1917-02 Test Method for Determination of Phosphorus in Nickel, Ferronickel, and Nickel Alloys by the Phosphovanadomolybdate Molecular Absorption Spectrometric Method

E1937-04 Test Method for Determination of Nitrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique

E1938-02 Test Method for Determination of Titanium in Nickel Alloys by the Diantipyrylmethane Molecular Absorption Spectrometric Method

E1941-04 Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys

E1950-98R03 Practice for Reporting Results from Methods of Chemical Analysis

E1999-99R04 Test Method for Analysis of Cast Iron Using Optical Emission Spectrometry

E2027-05 Practice for Conducting Proficiency Tests in the Chemical Analysis of Metals, Ores, and Related Materials

E2028-99R05 Practice for Receiving, Testing and Reporting Results of Investigation of Metal, Ore, or Metal Related Samples that Are or May Be Involved in Litigation

E2050-99R04 Test Method for Determination of Total Carbon in Mold Powders by Combustion-Infrared Absorption Method

E2053-00 Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Metals, Ores, and Related Materials

E2054 Practice for Performance\NBased Description of Instruments in Chemical Analysis Methods

E2055-99 Practice for Referencing Test Methods for Chemical Analysis of Metals and Related Materials

E2093-05 Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization

E2165-01 Practice for Establishing an Uncertainty Budget for the Chemical Analysis of Metals, Ores, and Related Materials

E2209-02 Test Method for Analysis of High Manganese Steel Using Atomic Emission Spectrometry

E2242-02 Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure

E2293-03 Practice for Drying of Metal Bearing Ores, Concentrates and Related Metallurgical Materials for the Determination of Mercury

E2294-03 Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates and Related Materials by Fire Assay Gravimetry

E2295-03 Practice for Fire Assay Silver Corrections in Analysis of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Silver Determination in Slags and Cupels

E2296-03 Practice for Silver Corrections in Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Fire Assay Slag Recycling and Cupel Proof Gravimetry

E2371-04 Test Method for Analysis of Titanium and Titanium Alloys by Atomic Emission Plasma Spectrometry

E2410-04 Practice for Designing and Validating Performance Based Test Methods for the Analysis of Metals, Ores, and Related Materials

E2437-05 Practice for Designing and Validating Performance-Based Test Methods for the Analysis of Metals, Ores, and Related Materials

https://docs.google.com/folder/d/0BySAaSKrtUDnWlB4WkI1X0VkNXM/edit?pli=1