Volume 03.01 Metals -- Mechanical Testing; Elevated and Low-Temperature Tests; Metallography

Section 03 - Metals Test Methods and Analytical Procedures

Volume 03.01, January 2005

Metals -- Mechanical Testing; Elevated and Low-Temperature Tests; Metallography

E0003-01 Guide for Preparation of Metallographic Specimens

E0004-03 Practices for Force Verification of Testing Machines

E0006-03 Terminology Relating to Methods of Mechanical Testing

E0007-03 Terminology Relating to Metallography

E0008-04 Test Methods for Tension Testing of Metallic Materials

E0008M-04 Test Methods for Tension Testing of Metallic Materials \[Metric\]

E0009-89AR00 Test Methods of Compression Testing of Metallic Materials at Room Temperature

E0010-01E01 Test Method for Brinell Hardness of Metallic Materials

E0018-05E01 Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials

E0021-03A Test Methods for Elevated Temperature Tension Tests of Metallic Materials

E0023-05 Test Methods for Notched Bar Impact Testing of Metallic Materials

E0045-97R02 Test Methods for Determining the Inclusion Content of Steel

E0074-04 Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines

E0081-96R01 Test Method for Preparing Quantitative Pole Figures

E0082-91R01 Test Method for Determining the Orientation of a Metal Crystal

E0083-02 Practice for Verification and Classification of Extensometer System

E0092-82R03E02 Test Method for Vickers Hardness of Metallic Materials

E0103-84R02 Test Method for Rapid Indentation Hardness Testing of Metallic Materials

E0110-82R02 Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers

E0111-04 Test Method for Young's Modulus, Tangent Modulus, and Chord Modulus

E0112-96R04 Test Methods for Determining Average Grain Size

E0132-04 Test Method for Poisson's Ratio at Room Temperature

E0139-00E01 Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials

E0140-05 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness

E0143-02 Test Method for Shear Modulus at Room Temperature

E0190-92R03 Test Method for Guided Bend Test for Ductility of Welds

E0208-95AR00 Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels

E0209-00 Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates

E0238-84R02 Test Method for Pin-Type Bearing Test of Metallic Materials

E0251-92R03 Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages

E0290-97AR04 Test Methods for Bend Testing of Material for Ductility

E0292-01 Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials

E0328-02 Test Methods for Stress Relaxation for Materials and Structures

E0338-03 Test Method of Sharp-Notch Tension Testing of High-Strength Sheet Materials

E0340-00E01 Test Method for Macroetching Metals and Alloys

E0345-93R02 Test Methods of Tension Testing of Metallic Foil

E0381-01 Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings

E0384-99E01 Test Method for Microindentation Hardness of Materials

E0399-90R97 Test Method for Plane-Strain Fracture Toughness of Metallic Materials

E0407-99 Practice for Microetching Metals and Alloys

E0436-03 Test Method for Drop-Weight Tear Tests of Ferritic Steels

E0448-82R02E01 Practice for Scleroscope Hardness Testing of Metallic Materials

E0466-96R02E01 Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials

E0467-98AR04 Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System

E0468-90R04E01 Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials

E0517-00 Test Method for Plastic Strain Ratio r for Sheet Metal

E0561-98 Practice for R-Curve Determination

E0562-02 Test Method for Determining Volume Fraction by Systematic Manual Point Count

E0602-03 Test Method for Sharp-Notch Tension Testing with Cylindrical Specimens

E0604-83R02 Test Method for Dynamic Tear Testing of Metallic Materials

E0606-04 Practice for Strain-Controlled Fatigue Testing

E0633-00R05 Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800|SDF (1000|SDC) in Air

E0643-84R00 Test Method for Ball Punch Deformation of Metallic Sheet Material

E0646-00 Test Method for Tensile Strain-Hardening Exponents (n -Values) of Metallic Sheet Materials

E0647-00 Test Method for Measurement of Fatigue Crack Growth Rates

E0739-91R04 Practice for Statistical Analysis of Linear or Linearized Stress-Life () and Strain-Life (|ge-) Fatigue Data

E0740-03 Practice for Fracture Testing with Surface-Crack Tension Specimens

E0766-98R03 Practice for Calibrating the Magnification of a Scanning Electron Microscope

E0768-99R05 Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel

E0796-94R00 Test Method for Ductility Testing of Metallic Foil

E0812 Test Method for Crack Strength of Slow-Bend Precracked Charpy Specimens of High-Strength Metallic Materials

E0837-01E01 Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method

E0855-90R00 Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading

E0883-02 Guide for Reflected\NLight Photomicrography

E0915-96R02 Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement

E0930-99 Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)

E0963-95R04 Practice for Electrolytic Extraction of Phases from Ni and Ni-Fe Base Superalloys Using a Hydrochloric-Methanol Electrolyte

E0975-03 Practice for X-Ray Determination of Retained Austenite in Steel with Near Random Crystallographic Orientation

E0986-04 Practice for Scanning Electron Microscope Beam Size Characterization

E1012-99 Practice for Verification of Specimen Alignment Under Tensile Loading

E1049-85R97 Practices for Cycle Counting in Fatigue Analysis

E1077-01R05 Test Methods for Estimating the Depth of Decarburization of Steel Specimens

E1122-96R02 Practice for Obtaining JK Inclusion Ratings Using Automatic Image Analysis

E1180-03E01 Practice for Preparing Sulfur Prints for Macrostructural Examination

E1181-02 Test Methods for Characterizing Duplex Grain Sizes

E1182 Test Method for Measurement of Surface Layer Thickness by Radial Sectioning

E1221-96R02 Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, , of Ferritic Steels

E1236-91R97 Practice for Qualifying Charpy Impact Machines as Reference Machines

E1237-93R03 Guide for Installing Bonded Resistance Strain Gages

E1245-03 Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis

E1268-01 Practice for Assessing the Degree of Banding or Orientation of Microstructures

E1271 Practice for Qualifying Charpy Verification Specimens of Heat-Treated Steel

E1290-02E01 Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement

E1304-97R02 Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials

E1319-98R03 Guide for High-Temperature Static Strain Measurement

E1351-01 Practice for Production and Evaluation of Field Metallographic Replicas

E1382-97R04 Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis

E1426-98R03 Test Method for Determining the Effective Elastic Parameter for X-Ray Diffraction Measurements of Residual Stress

E1450-03 Test Method for Tension Testing of Structural Alloys in Liquid Helium

E1457-00 Test Method for Measurement of Creep Crack Growth Rates in Metals

E1508-98R03 Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy

E1544-99R04E01 Practice for Construction of a Stepped Block and Its Use to Estimate Errors Produced by Speed-of-Sound Measurement Systems for Use on Solids

E1558-99R04 Guide for Electrolytic Polishing of Metallographic Specimens

E1561-93R03 Practice for Analysis of Strain Gage Rosette Data

E1595 Practice for Evaluating the Performance of Mechanical Testing Laboratories

E1681-03 Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials

E1685-00 Practice for Measuring the Change in Length of Fasteners Using the Ultrasonic Pulse-Echo Technique

E1761-95R99 Guide for Recommended Formats for Data Records Used in Computerization of Fatigue and Fracture Data of Metals

E1820-01 Test Method for Measurement of Fracture Toughness

E1823-96R02 Terminology Relating to Fatigue and Fracture Testing

E1842 Test Method for Macro-Rockwell Hardness Testing of Metallic Materials

E1856-97R02 Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines

E1875-00E01 Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance

E1876-01 Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration

E1920-03 Guide for Metallographic Preparation of Thermal Sprayed Coatings

E1921-05 Test Method for Determination of Reference Temperature, , for Ferritic Steels in the Transition Range

E1922-04 Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials

E1928-99 Practice for Estimating the Approximate Residual Circumferential Stress in Straight Thin-walled Tubing

E1942-98R04 Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing

E1949-03 Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages

E1951-02 Guide for Calibrating Reticles and Light Microscope Magnifications

E2014-99 Guide on Metallographic Laboratory Safety

E2015-04 Guide for Preparation of Plastics and Polymeric Specimens for Microstructural Examination

E2109-01 Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings

E2142-01 Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope

E2207-02 Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens

E2208-02 Guide for Evaluating Non-Contacting Optical Strain Measurement Systems

E2218-02 Test Method for Determining Forming Limit Curves

E2244-02 Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer

E2245-02 Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer

E2246-02 Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer

E2283-03 Practice for Extreme Value Analysis of Nonmetallic Inclusions in Steel and Other Microstructural Features

E2309-05 Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines

https://docs.google.com/folder/d/0BySAaSKrtUDnNzZsU0dQa3pXWmc/edit?pli=1