Volume 03.04 Magnetic Properties

Section 03 - Metals Test Methods and Analytical Procedures

Volume 03.04, April 2005

Magnetic Properties

A0034_A0034M-01 Practice for Sampling and Procurement Testing of Magnetic Materials

A0340-03A Terminology of Symbols and Definitions Relating to Magnetic Testing

A0341_A0341M-00 Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Methods

A0342_A0342M-04 Test Methods for Permeability of Feebly Magnetic Materials

A0343_A0343M-03 Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame

A0345-04 Specification for Flat-Rolled Electrical Steels for Magnetic Applications

A0348_A0348M-00 Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame

A0596_A0596M-95R04 Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens

A0598_A0598M-02 Test Method for Magnetic Properties of Magnetic Amplifier Cores

A0664-99 Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications

A0677_A0677M-99 Specification for Nonoriented Electrical Steel Fully Processed Types

A0683_A0683M-99 Specification for Nonoriented Electrical Steel, Semiprocessed Types

A0697_A0697M-03 Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods

A0698_A0698M-02 Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields

A0712-97R02 Test Method for Electrical Resistivity of Soft Magnetic Alloys

A0717_A0717M-01 Test Method for Surface Insulation Resistivity of Single-Strip Specimens

A0719_A0719M-02 Test Method for Lamination Factor of Magnetic Materials

A0720_A0720M-02 Test Method for Ductility of Nonoriented Electrical Steel

A0721_A0721M-02 Test Method for Ductility of Oriented Electrical Steel

A0726-00 Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types

A0753-02 Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)

A0772_A0772M-00 Test Method for ac Magnetic Permeability of Materials Using Sinusoidal Current

A0773_A0773M-01 Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs

A0801-04 Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650)

A0804_A0804M-04 Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens

A0811-03 Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy (P/M) Techniques

A0838-02 Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications

A0839-02 Specification for Iron-Phosphorus Powder Metallurgy (P/M) Parts for Soft Magnetic Applications

A0840_A0840M-00 Specification for Fully Processed Magnetic Lamination Steel

A0848-01 Specification for Low-Carbon Magnetic Iron

A0867-03 Specification for Iron-Silicon Relay Steels

A0876-03 Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types

A0883_A0883M-01 Test Method for Ferrimagnetic Resonance Linewidth and Gyromagnetic Ratio of Nonmetallic Magnetic Materials

A0889_A0889M-03 Test Method for Alternating-Current Magnetic Properties of Materials at Low Magnetic Flux Density Using the Voltmeter-Ammeter-Wattmeter-Varmeter Method and 25-cm Epstein Frame

A0893_A0893M-03 Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies

A0894_A0894M-00 Test Method for Saturation Magnetization or Induction of Nonmetallic Magnetic Materials

A0900_A0900M-01 Test Method for Lamination Factor of Amorphous Magnetic Strip

A0901-03 Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types

A0904-04 Specification for 50 Nickel-50 Iron Powder Metallurgy (P/M) Soft Magnetic Parts

A0912_A0912M-04 Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens

A0927_A0927M-04 Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method

A0932_A0932M-01 Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens

A0937_A0937M-01 Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces

A0971-00 Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils

A0976-03 Classification of Insulating Coatings for Electrical Steels by Composition, Relative Insulating Ability and Application

A0977_A0977M-02 Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs

A1009-00 Specification for Soft Magnetic MnZn Ferrite Core Materials for High Frequency (10 kHz-1 MHz) Power Transformer and Filter Inductor Applications

A1013-00 Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method

https://docs.google.com/folder/d/0BySAaSKrtUDnN1FNRm1BV0xxeEk/edit?pli=1