Volume 04.02 Concrete and Aggregates

Section 04 - Construction

Volume 04.02, October 2005

Concrete and Aggregates

C0029_C0029M-97R03 Test Method for Bulk Density (|P`Unit Weight|P') and Voids in Aggregate

C0031_C0031M-03A Practice for Making and Curing Concrete Test Specimens in the Field

C0033-03 Specification for Concrete Aggregates

C0039_C0039M-04A Test Method for Compressive Strength of Cylindrical Concrete Specimens

C0040-04 Test Method for Organic Impurities in Fine Aggregates for Concrete

C0042_C0042M-04 Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete

C0070-94R01 Test Method for Surface Moisture in Fine Aggregate

C0078-02 Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)

C0087-04 Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar

C0088-99A Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate

C0094_C0094M-04A Specification for Ready-Mixed Concrete

C0117-04 Test Method for Materials Finer than 75-m (No. 200) Sieve in Mineral Aggregates by Washing

C0123-04 Test Method for Lightweight Particles in Aggregate

C0125-03 Terminology Relating to Concrete and Concrete Aggregates

C0127-04 Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate

C0128-04A Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate

C0131-03 Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine

C0136-05 Test Method for Sieve Analysis of Fine and Coarse Aggregates

C0138_C0138M-01A Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete

C0142-97R04 Test Method for Clay Lumps and Friable Particles in Aggregates

C0143_C0143M-05 Test Method for Slump of Hydraulic-Cement Concrete

C0156-03 Test Method for Water Retention by Concrete Curing Materials

C0157_C0157M-04 Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete

C0171-03 Specification for Sheet Materials for Curing Concrete

C0172-04 Practice for Sampling Freshly Mixed Concrete

C0173_C0173M-01E01 Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method

C0174_C0174M-97 Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores

C0192_C0192M-05 Practice for Making and Curing Concrete Test Specimens in the Laboratory

C0215-02 Test Method for Fundamental Transverse, Longitudinal, and Torsional Resonant Frequencies of Concrete Specimens

C0227-03 Test Method for Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method)

C0231-04 Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method

C0232-04 Test Methods for Bleeding of Concrete

C0233-04 Test Method for Air-Entraining Admixtures for Concrete

C0260-01 Specification for Air-Entraining Admixtures for Concrete

C0289-03 Test Method for Potential Alkali-Silica Reactivity of Aggregates (Chemical Method)

C0293-02 Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)

C0294-05 Descriptive Nomenclature for Constituents of Concrete Aggregates

C0295-03 Guide for Petrographic Examination of Aggregates for Concrete

C0309-03 Specification for Liquid Membrane-Forming Compounds for Curing Concrete

C0311-04 Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete

C0330-04 Specification for Lightweight Aggregates for Structural Concrete

C0331-04 Specification for Lightweight Aggregates for Concrete Masonry Units

C0332-99 Specification for Lightweight Aggregates for Insulating Concrete

C0341_C0341M-05 Practice for Length Change of Cast, Drilled, or Sawed Specimens of Hydraulic-Cement Mortar and Concrete

C0387-04 Specification for Packaged, Dry, Combined Materials for Mortar and Concrete

C0403_C0403M-05 Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance

C0418-05 Test Method for Abrasion Resistance of Concrete by Sandblasting

C0441-05 Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction

C0457-98 Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete

C0469-02 Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression

C0470_C0470M-02A Specification for Molds for Forming Concrete Test Cylinders Vertically

C0490-04 Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete

C0494_C0494M-05 Specification for Chemical Admixtures for Concrete

C0495-99A Test Method for Compressive Strength of Lightweight Insulating Concrete

C0496_C0496M-04 Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens

C0511-05 Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes

C0512-02 Test Method for Creep of Concrete in Compression

C0513 Test Method for Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive Strength

C0535-03E01 Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine

C0566-97R04 Test Method for Total Evaporable Moisture Content of Aggregate by Drying

C0567-05 Test Method for Determining Density of Structural Lightweight Concrete

C0586-05 Test Method for Potential Alkali Reactivity of Carbonate Rocks as Concrete Aggregates (Rock-Cylinder Method)

C0597-02 Test Method for Pulse Velocity Through Concrete

C0617-98R03 Practice for Capping Cylindrical Concrete Specimens

C0618-03 Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete

C0637-98AR03 Specification for Aggregates for Radiation-Shielding Concrete

C0638-92R02 Descriptive Nomenclature of Constituents of Aggregates for Radiation-Shielding Concrete

C0641-98E01 Test Method for Iron Staining Materials in Lightweight Concrete Aggregates

C0642-97 Test Method for Density, Absorption, and Voids in Hardened Concrete

C0666_C0666M-03 Test Method for Resistance of Concrete to Rapid Freezing and Thawing

C0670-03 Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials

C0671 Test Method for Critical Dilation of Concrete Specimens Subjected to Freezing

C0672_C0672M-03 Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals

C0682 Practice for Evaluation of Frost Resistance of Coarse Aggregates in Air-Entrained Concrete by Critical Dilation Procedures

C0684-99R03 Test Method for Making, Accelerated Curing, and Testing Concrete Compression Test Specimens

C0685_C0685M-01 Specification for Concrete Made by Volumetric Batching and Continuous Mixing

C0702-98R03 Practice for Reducing Samples of Aggregate to Testing Size

C0779_C0779M-00 Test Method for Abrasion Resistance of Horizontal Concrete Surfaces

C0796-04 Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam

C0801 Test Method for Determining the Mechanical Properties of Hardened Concrete Under Triaxial Loads

C0802-96R02 Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials

C0803_C0803M-03 Test Method for Penetration Resistance of Hardened Concrete

C0805-02 Test Method for Rebound Number of Hardened Concrete

C0823-00 Practice for Examination and Sampling of Hardened Concrete in Constructions

C0827-01A Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures

C0856-04 Practice for Petrographic Examination of Hardened Concrete

C0869-91R99 Specification for Foaming Agents Used in Making Preformed Foam for Cellular Concrete

C0873-04 Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds

C0876-91R99 Test Method for Half-Cell Potentials of Uncoated Reinforcing Steel in Concrete

C0878_C0878M-03 Test Method for Restrained Expansion of Shrinkage-Compensating Concrete

C0881_C0881M-02 Specification for Epoxy-Resin-Base Bonding Systems for Concrete

C0882-99 Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear

C0884_C0884M-98 Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay

C0900-01 Test Method for Pullout Strength of Hardened Concrete

C0918-02 Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength

C0928-05 Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs

C0937-02 Specification for Grout Fluidifier for Preplaced-Aggregate Concrete

C0938-02 Practice for Proportioning Grout Mixtures for Preplaced-Aggregate Concrete

C0939-02 Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)

C0940-98AR03 Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory

C0941-02 Test Method for Water Retentivity of Grout Mixtures for Preplaced-Aggregate Concrete in the Laboratory

C0942-99R04 Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory

C0943-02 Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory

C0944-99R05 Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method

C0953-87R97 Test Method for Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory

C0979-05 Specification for Pigments for Integrally Colored Concrete

C0989-05 Specification for Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars

C0995-01 Test Method for Time of Flow of Fiber-Reinforced Concrete Through Inverted Slump Cone

C1017_C1017M-03 Specification for Chemical Admixtures for Use in Producing Flowing Concrete

C1018-97 Test Method for Flexural Toughness and First-Crack Strength of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)

C1040-93R00 Test Methods for Density of Unhardened and Hardened Concrete In Place By Nuclear Methods

C1042-99 Test Method for Bond Strength of Latex Systems Used With Concrete By Slant Shear

C1059-99 Specification for Latex Agents for Bonding Fresh To Hardened Concrete

C1064_C1064M-05 Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete

C1067-00 Practice for Conducting A Ruggedness or Screening Program for Test Methods for Construction Materials

C1073-97AR03 Test Method for Hydraulic Activity of Ground Slag by Reaction with Alkali

C1074-04 Practice for Estimating Concrete Strength by the Maturity Method

C1077-05 Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation

C1084-02 Test Method for Portland-Cement Content of Hardened Hydraulic-Cement Concrete

C1090-01R05E01 Test Method for Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout

C1102 Test Method for Time of Setting of Portland-Cement Pastes Containing Quick-Setting Accelerating Admixtures for Shotcrete by the Use of Gillmore Needles

C1105-05 Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction

C1107-02 Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink)

C1116-03 Specification for Fiber-Reinforced Concrete and Shotcrete

C1117 Test Method for Time of Setting of Shotcrete Mixtures by Penetration Resistance

C1137-97 Test Method for Degradation of Fine Aggregate Due to Attrition

C1138-97 Test Method for Abrasion Resistance of Concrete (Underwater Method)

C1140-03A Practice for Preparing and Testing Specimens from Shotcrete Test Panels

C1141-01 Specification for Admixtures for Shotcrete

C1150 Test Method for The Break-Off Number of Concrete

C1152_C1152M-04 Test Method for Acid-Soluble Chloride in Mortar and Concrete

C1170-91R98E01 Test Methods for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table

C1176-92R98 Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table

C1202-97 Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration

C1218_C1218M-99 Test Method for Water-Soluble Chloride in Mortar and Concrete

C1231_C1231M-00E01 Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders

C1240-04 Specification for Silica Fume Used in Cementitious Mixtures

C1245_C1245M-03 Test Method for Determining Bond Strength Between Hardened Roller Compacted Concrete and Other Hardened Cementitious Mixtures (Point Load Test)

C1252-03 Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)

C1260-05 Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)

C1293-05 Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction

C1315-03 Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete

C1362-04 Test Method for Flow of Freshly Mixed Hydraulic-Cement Concrete

C1383-04 Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method

C1385_C1385M-98R04E01 Practice for Sampling Materials for Shotcrete

C1398-98E01 Test Method for The Laboratory Determination of the Time of Setting of Hydraulic-Cement Mortars Containing Additives for Shotcrete by the Use of Gillmore Needles

C1399-04 Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete

C1404_C1404M-98R03 Test Method for Bond Strength of Adhesive Systems Used With Concrete as Measured by Direct Tension

C1435_C1435M-05 Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer

C1436-99R04 Specification for Materials for Shotcrete

C1438-99E01 Specification for Latex and Powder Polymer Modifiers for Hydraulic Cement Concrete and Mortar

C1439-99E01 Test Methods for Polymer-Modified Mortar and Concrete

C1451-99 Practice for Determining Uniformity of Ingredients of Concrete From a Single Source

C1480-00R05 Specification for Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete Application

C1524-02A Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method)

C1542_C1542M-02 Test Method for Measuring Length of Concrete Cores

C1543-02 Test Method for Determining the Penetration of Chloride Ion into Concrete by Ponding

C1550-04 Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)

C1556-04 Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion

C1567-04 Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)

C1580-05 Test Method for Water-Soluble Sulfate in Soil

C1581-04 Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage

C1582_C1582M-04 Specification for Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete

C1583-04 Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)

C1585-04 Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes

C1602_C1602M-05 Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete

C1603-05 Test Method for Measurement of Solids in Water

C1604_C1604M-05 Test Method for Obtaining and Testing Drilled Cores of Shotcrete

https://docs.google.com/folder/d/0BySAaSKrtUDnNU5aUTRXTW52U3c/edit?pli=1