Section
08 - Plastics
Volume 08.04, January 2005
Plastic Pipe and Building
Products
C0581-03 Practice for Determining Chemical
Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures
Intended for Liquid Service
C0582-02 Specification for Contact-Molded
Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant
Equipment
D1494-97R01 Test Method for Diffuse Light
Transmission Factor of Reinforced Plastics Panels
D1527-99E01 Specification for
Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80
D1598-02 Test Method for Time-to-Failure of
Plastic Pipe Under Constant Internal Pressure
D1599-99E01 Test Method for Resistance to
Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
D1694-95R00 Specification for Threads 60|SD
(Stub) for |P`Fiberglass'' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D1785-04A Specification for Poly(Vinyl
Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
D2104-03 Specification for Polyethylene (PE)
Plastic Pipe, Schedule 40
D2105-01 Test Method for Longitudinal Tensile
Properties of |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin)
Pipe and Tube
D2122-98R04 Test Method for Determining
Dimensions of Thermoplastic Pipe and Fittings
D2143-00 Test Method for Cyclic Pressure
Strength of Reinforced, Thermosetting Plastic Pipe
D2152-95R03 Test Method for Adequacy of
Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by
Acetone Immersion
D2235-04 Specification for Solvent Cement for
Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
D2239-03 Specification for Polyethylene (PE)
Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
D2241-04B Specification for Poly(Vinyl
Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
D2282-99E01 Specification for
Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR)
D2290-04 Test Method for Apparent Hoop
Tensile Strength of Plastic or Reinforced Plastic Pipe by Split Disk Method
D2310-01 Classification for Machine-Made
|P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D2321-00 Practice for Underground Installation
of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
D2412-02 Test Method for Determination of
External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
D2444-99 Test Method for Determination of the
Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling
Weight)
D2447-03 Specification for Polyethylene (PE)
Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter
D2464-99E01 Specification for Threaded
Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
D2466-02 Specification for Poly(Vinyl
Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
D2467-04E01 Specification for Poly(Vinyl
Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
D2468 Specification for
Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe Fittings, Schedule 40
D2513-04A Specification for Thermoplastic Gas
Pressure Pipe, Tubing, and Fittings
D2517-00E01 Specification for Reinforced
Epoxy Resin Gas Pressure Pipe and Fittings
D2564-04 Specification for Solvent Cements
for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems
D2609-02 Specification for Plastic Insert
Fittings for Polyethylene (PE) Plastic Pipe
D2657-03 Practice for Heat Fusion Joining of
Polyolefin Pipe and Fittings
D2661-02 Specification for Acrylonitrile-Butadiene-Styrene
(ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
D2662 Specification for Polybutylene (PB)
Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
D2665-04A Specification for Poly(Vinyl
Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
D2666-96A Specification for Polybutylene (PB)
Plastic Tubing
D2672-96AR03 Specification for Joints for IPS
PVC Pipe Using Solvent Cement
D2680-01 Specification for
Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite
Sewer Piping
D2683-04 Specification for Socket-Type
Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and
Tubing
D2729-03 Specification for Poly(Vinyl
Chloride) (PVC) Sewer Pipe and Fittings
D2737-03 Specification for Polyethylene (PE)
Plastic Tubing
D2749-02 Symbols for Dimensions of Plastic
Pipe Fittings
D2751-96A Specification for
Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings
D2774-04 Practice for Underground
Installation of Thermoplastic Pressure Piping
D2837-04 Test Method for Obtaining
Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design
Basis for Thermoplastic Pipe Products
D2846_D2846M-99E01 Specification for
Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water
Distribution Systems
D2852-95R02 Specification for Styrene-Rubber
(SR) Plastic Drain Pipe and Fittings
D2855-96R02 Practice for Making
Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings
D2924-01 Test Method for External Pressure
Resistance of |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin)
Pipe
D2925-01 Test Method for Beam Deflection of
|P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full
Bore Flow
D2949-01AE01 Specification for 3.25-in.
Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe
and Fittings
D2992-01 Practice for Obtaining Hydrostatic
or Pressure Design Basis for |P`Fiberglass|P' (Glass-Fiber-Reinforced
Thermosetting-Resin) Pipe and Fittings
D2996-01 Specification for Filament-Wound
|P`Fiberglass'' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D2997-01 Specification for Centrifugally Cast
|P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D3000 Specification for Polybutylene (PB)
Plastic Pipe (SDR-PR) Based on Outside Diameter
D3034-04A Specification for Type PSM
Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
D3035-03A Specification for Polyethylene (PE)
Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
D3122-95R02 Specification for Solvent Cements
for Styrene-Rubber (SR) Plastic Pipe and Fittings
D3138-04 Specification for Solvent Cements
for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and
Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components
D3139-98 Specification for Joints for Plastic
Pressure Pipes Using Flexible Elastomeric Seals
D3212-96AR03E01 Specification for Joints for
Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
D3261-03 Specification for Butt Heat Fusion
Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and
Tubing
D3262-04 Specification for |P`Fiberglass|P'
(Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
D3299-00 Specification for Filament-Wound
Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
D3309-96AR02 Specification for Polybutylene
(PB) Plastic Hot- and Cold-Water Distribution Systems
D3311-02E01 Specification for Drain, Waste,
and Vent (DWV) Plastic Fittings Patterns
D3517-04 Specification for |P`Fiberglass|P'
(Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
D3567-97R02 Practice for Determining
Dimensions of |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting Resin)
Pipe and Fittings
D3678-97R01 Specification for Rigid Poly(Vinyl
Chloride) (PVC) Interior-Profile Extrusions
D3679-04A Specification for Rigid Poly(Vinyl
Chloride) (PVC) Siding
D3681-01E01 Test Method for Chemical
Resistance of |P`Fiberglass|P' (Glass\NFiber\NReinforced Thermosetting-Resin)
Pipe in a Deflected Condition
D3753-99 Specification for
Glass-Fiber-Reinforced Polyester Manholes and Wetwells
D3754-04 Specification for |P`Fiberglass|P'
(Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
D3839-02E01 Guide for Underground Installation
of |P`Fiberglass|P' (Glass-FiberReinforced Thermosetting-Resin) Pipe
D3840-01 Specification for |P`Fiberglass|P'
(Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure
Applications
D3841-97R01 Specification for Glass-Fiber-Reinforced
Polyester Plastic Panels
D3982-03 Specification for Contact Molded
|P`Fiberglass|P' (Glass Fiber Reinforced Thermosetting Resin) Duct and Hoods
D4024-00 Specification for Machine Made
|P`Fiberglass'' (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
D4068-01 Specification for Chlorinated
Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane
D4097-01 Specification for Contact-Molded
Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
D4161-01 Specification for |P`Fiberglass|P'
(Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible
Elastomeric Seals
D4166-99R04E01 Test Method for Measurement of
Thickness of Nonmagnetic Materials by Means of a Digital Magnetic Intensity
Instrument
D4167-97R02 Specification for
Fiber-Reinforced Plastic Fans and Blowers
D4226-00 Test Methods for Impact Resistance
of Rigid Poly(Vinyl Chloride) (PVC) Building Products
D4398-02 Test Method for Determining the
Chemical Resistance of Fiberglass-Reinforced Thermosetting Resins by One-Side
Panel Exposure
D4477-04A Specification for Rigid
(Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit
D4495-00 Test Method for Impact Resistance of
Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
D4551-96R01 Specification for Poly(Vinyl
Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane
D4726-02 Specification for Rigid Poly(Vinyl
Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and
Doors
D4756-03 Practice for Installation of Rigid
Poly(Vinyl Chloride) (PVC) Siding and Soffit
D4803-97R02E01 Test Method for Predicting
Heat Buildup in PVC Building Products
D5140 Guide for Testing Polyurethane
|P`Poured in Place|P' Thermal Break Materials
D5206-96R02E01 Test Method for Windload
Resistance of Rigid Poly(Vinyl Chloride) (PVC) Siding
D5319-97R01 Specification for Glass-Fiber
Reinforced Polyester Wall and Ceiling Panels
D5364-93R02 Guide for Design, Fabrication,
and Erection of Fiberglass Reinforced Plastic Chimney Liners with Coal-Fired
Units
D5365-01E01 Test Method for Long-Term
Ring-Bending Strain of |P`Fiberglass|P' (Glass-Fiber-Reinforced
Thermosetting-Resin) Pipe
D5421-00 Specification for Contact Molded
|P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
D5677-00 Specification for Fiberglass
(Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive
Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
D5685-02 Specification for |P`Fiberglass|P'
(Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
D5686 Specification for
|P`Fiberglass|P'(Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe
Fittings, Adhesive Bonded Joint Type Epoxy Resin, for Condensate Return Lines
D5813-04 Specification for Cured-In-Place Thermosetting
Resin Sewer Piping Systems
D5926-04 Specification for Poly (Vinyl
Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and
Storm Plumbing Systems
D6041-97R02 Specification for Contact-Molded
|P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion
Resistant Pipe and Fittings
D6777-02 Test Method for Relative Rigidity of
Poly(Vinyl Chloride)(PVC) Siding
D6783-03 Specification for Polymer Concrete
Pipe
D6864-03AE01 Specification for Color and
Appearance Retention of Solid Colored Plastic Siding Products
F0402-93R99 Practice for Safe Handling of
Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and
Fittings
F0405-97 Specification for Corrugated
Polyethylene (PE) Pipe and Fittings
F0409-02 Specification for Thermoplastic
Accessible and Replaceable Plastic Tube and Tubular Fittings
F0412-01AE01 Terminology Relating to Plastic
Piping Systems
F0423 Specification for
Polytetrafluoroethylene (PTFE) Plastic-Lined Ferrous Metal Pipe, Fittings, and
Flanges
F0437-99 Specification for Threaded
Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
F0438-04 Specification for Socket-Type
Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
F0439-02E01 Specification for Chlorinated
Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
F0441_F0441M-02 Specification for Chlorinated
Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
F0442_F0442M-99 Specification for Chlorinated
Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR\NPR)
F0449-02E01 Practice for Subsurface
Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water
Table Control
F0477-02E01 Specification for Elastomeric
Seals (Gaskets) for Joining Plastic Pipe
F0480-02 Specification for Thermoplastic Well
Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and
SCH 80
F0481-97R02 Practice for Installation of
Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields
F0491 Specification for Poly(Vinylidene
Fluoride) (PVDF) Plastic-Lined Ferrous Metal Pipe and Fittings
F0492 Specification for Propylene and
Polypropylene (PP) Plastic-Lined Ferrous Metal Pipe and Fittings
F0493-04 Specification for Solvent Cements
for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings
F0512-95R01E01 Specification for Smooth-Wall
Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
F0545 Specification for PVC and ABS Injected
Solvent Cemented Plastic Pipe Joints
F0546 Specification for Perfluoro
(Ethylene-Propylene) Copolymer (FEP) Plastic-Lined Ferrous Metal Pipe and
Fittings
F0585-94R00 Practice for Insertion of
Flexible Polyethylene Pipe Into Existing Sewers
F0599 Specification for Poly(Vinylidene Chloride)
(PVDC) Plastic-Lined Ferrous Metal Pipe and Fittings
F0610_F0610M-00A Test Method for Evaluating
the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the
Heat Reversion Technique
F0628-01 Specification for
Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and
Vent Pipe With a Cellular Core
F0645-04 Guide for Selection, Design, and
Installation of Thermoplastic Water- Pressure Piping Systems
F0656-02 Specification for Primers for Use in
Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings
F0667-97 Specification for Large Diameter
Corrugated Polyethylene Pipe and Fittings
F0679-03 Specification for Poly(Vinyl
Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
F0689-97R04 Practice for Determination of the
Temperature of Above-Ground Plastic Gas Pressure Pipe Within Metallic Casings
F0690-86R03E02 Practice for Underground
Installation of Thermoplastic Pressure Piping Irrigation Systems
F0699-00E01 Practice for Accelerated
Conditioning of Polybutylene Pipe and Tubing for Subsequent Quality Control
Testing
F0714-03 Specification for Polyethylene (PE)
Plastic Pipe (SDR-PR) Based on Outside Diameter
F0725-03E01 Practice for Drafting Impact Test
Requirements In Thermoplastic Pipe And Fittings Standards
F0758-95R00 Specification for Smooth-Wall
Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and
Similar Drainage
F0771-99E01 Specification for Polyethylene
(PE) Thermoplastic High-Pressure Irrigation Pipeline Systems
F0781 Specification for Perfluoro
(Alkoxyalkane) Copolymer (PFA) Plastic-Lined Ferrous Metal Pipe and Fittings
F0789 Specification for Type PS-46 and Type
PS-115 Poly(Vinyl Chloride) (PVC) Plastic Gravity Flow Sewer Pipe and Fittings
F0794-03 Specification for Poly(Vinyl
Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled
Inside Diameter
F0810-01 Specification for Smoothwall
Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields
F0845 Specification for Plastic Insert
Fittings for Polybutylene (PB) Tubing
F0876-04 Specification for Crosslinked
Polyethylene (PEX) Tubing
F0877-02A Specification for Crosslinked
Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems
F0878 Specification For Polybuteylene (PB)
Thermoplastic Thin-Wall Drip Irrigation Tubing
F0891-04 Specification for Coextruded
Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
F0892 Specification for Polyethylene (PE)
Corrugated Pipe With a Smooth Interior and Fittings
F0894-98A Specification for Polyethylene (PE)
Large Diameter Profile Wall Sewer and Drain Pipe
F0905-04 Practice for Qualification of
Polyethylene Saddle-Fused Joints
F0913-02 Specification for Thermoplastic
Elastomeric Seals (Gaskets) for Joining Plastic Pipe
F0948-94R01E01 Test Method for
Time-to-Failure of Plastic Piping Systems and Components Under Constant
Internal Pressure With Flow
F0949-03 Specification for Poly(Vinyl
Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
F1025-94R00 Guide for Selection and Use of
Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or
Holes in Polyethylene Gas Pressure Pipe
F1041-02 Guide for Squeeze-Off of Polyolefin
Gas Pressure Pipe and Tubing
F1055-98E01 Specification for Electrofusion
Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe
and Tubing
F1056-04 Specification for Socket Fusion
Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings
F1057-87R00 Practice for Estimating the
Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion
Technique
F1176-01E01 Practice for Design and
Installation of Underground Thermoplastic Irrigation Systems With Maximum
Working Pressure of 125 psi
F1216-03 Practice for Rehabilitation of
Existing Pipelines and Conduits by the Inversion and Curing of a
Resin-Impregnated Tube
F1248-96R02E01 Test Method for Determination
of Environmental Stress Crack Resistance (ESCR) of Polyethylene Pipe
F1281-03 Specification for Crosslinked
Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
F1282-03 Specification for
Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
F1290-98AR04 Practice for Electrofusion
Joining Polyolefin Pipe and Fittings
F1335-04 Specification for Pressure-Rated
Composite Pipe and Fittings for Elevated Temperature Service
F1336-02 Specification for Poly(Vinyl
Chloride) (PVC) Gasketed Sewer Fittings
F1365-91R99E01 Test Method for Water
Infiltration Resistance of Plastic Underground Conduit Joints Which Use
Flexible Elastomeric Seals
F1380-95AR02E01 Specification for Metal
Insert Fittings for Polybutylene (PB) Tubing
F1412-01E01 Specification for Polyolefin Pipe
and Fittings for Corrosive Waste Drainage Systems
F1417-92R98 Test Method for Installation
Acceptance of Plastic Gravity Sewer Lines Using Low-Pressure Air
F1429-99 Test Method for Assembly Force of
Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located
in the Bell
F1473-01E01 Test Method for Notch Tensile
Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and
Resins
F1474 Test Method for Slow Crack Growth
Resistance of Notched Polyethylene Plastic Pipe
F1483-98 Specification for Oriented
Poly(Vinyl Chloride), PVCO, Pressure Pipe
F1488-03 Specification for Coextruded
Composite Pipe
F1498-00E01 Specification for Taper Pipe
Threads 60|SD for Thermoplastic Pipe and Fittings
F1499-01 Specification for Coextruded
Composite Drain, Waste, and Vent Pipe (DWV)
F1504-02 Specification for Folded Poly(Vinyl
Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation
F1533-01 Specification for Deformed
Polyethylene (PE) Liner
F1545-97R03 Specification for Plastic-Lined
Ferrous Metal Pipe, Fittings, and Flanges
F1563-01 Specification for Tools to
Squeeze-off Polyethylene (PE) Gas Pipe or Tubing
F1588-96R02 Test Method for Constant Tensile
Load Joint Test (CTLJT)
F1589 Test Method for Determination of the
Critical Pressure for Rapid Crack Propagation in Plastic Pipe
F1606 Practice for Rehabilitation of Existing
Sewers and Conduits with Deformed Polyethylene (PE) Liner
F1668-96R02 Guide for Construction Procedures
for Buried Plastic Pipe
F1673-04 Specification for Polyvinylidene
Fluoride (PVDF) Corrosive Waste Drainage Systems
F1674-96 Test Method for Joint Restraint
Products for Use with PVC Pipe
F1675-03 Practice for Life-Cycle Cost
Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried
Conduits
F1697-02 Specification for Poly(Vinyl
Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe
Rehabilitation of Existing Sewers and Conduit
F1698-02 Practice for Installation of
Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation
of Existing Man-Entry Sewers and Conduits
F1732-96 Specification for Poly(Vinyl
Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material
F1733-96R02 Specification for Butt Heat
Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing
F1734-03 Practice for Qualification of a
Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid
Long-Term Damage in Polyethylene (PE) Gas Pipe
F1735-02E01 Specification for Poly (Vinyl
Chloride)(PVC) Profile Strip for PVC Liners for Rehabilitation of Existing
Man-Entry Sewers and Conduits
F1741-02A Practice for Installation of
Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation
of Existing Sewers and Conduits
F1743-96R03 Practice for Rehabilitation of
Existing Pipelines and Conduits by Pulled-in-Place Installation of
Cured-in-Place Thermosetting Resin Pipe (CIPP)
F1759-97R04 Practice for Design of
High-Density Polyethylene (HDPE) Manholes for Subsurface Applications
F1760-01 Specification for Coextruded
Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having
Reprocessed-Recycled Content
F1802-04 Test Method for Performance Testing
of Excess Flow Valves
F1803-04 Specification for Poly (Vinyl
Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled
Inside Diameter
F1804-03 Practice for Determining Allowable
Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation\t
F1807-04 Specification for Metal Insert
Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX)
Tubing
F1865-02A Specification for Mechanical Cold
Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene
(PEX) Tubing
F1866-98 Specification for Poly (Vinyl
Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings
F1867-98R04 Practice for Installation of
Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and
Conduit Rehabilitation
F1871-02 Specification for Folded/Formed Poly
(Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation
F1901-98R04 Specification for Polyethylene
(PE) Pipe and Fittings for Roof Drain Systems
F1924-01E01 Specification for Plastic
Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution
Pipe and Tubing
F1947-04 Practice for Installation of Folded
Poly (Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits
F1948-99AE01 Specification for Metallic
Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas
Distribution Pipe and Tubing
F1960-04 Specification for Cold Expansion
Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene
(PEX) Tubing
F1961-02A Specification for Metal Mechanical
Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene
(PEX) Tubing
F1962-99 Guide for Use of Maxi-Horizontal
Directional Drilling for Placement of Polyethylene Pipe or Conduit Under
Obstacles, Including River Crossings
F1970-01 Specification for Special Engineered
Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or
Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
F1973-02 Specification for Factory Assembled
Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11
(PA11) Fuel Gas Distribution Systems
F1974-04 Specification for Metal Insert
Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked
Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe
F1986-01 Specification for Multilayer Pipe
Type 2, Compression Fittings, and Compression Joints for Hot and Cold
Drinking-Water Systems
F1987-01 Specification for Multilayer Pipe
Type 2, Compression Fittings, and Compression Joints for Hydronic Heating
Systems
F2018-00E01 Test Method for Time-to-Failure
of Plastics Using Plane Strain Tensile Specimens
F2019-03 Practice for Rehabilitation of
Existing Pipelines and Conduits by the Pulled in Place Installation of Glass
Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)
F2021-00 Specification for Design and
Installation of Plastic Syphonic Roof Drainage Systems
F2023-04 Test Method for Evaluating the
Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to
Hot Chlorinated Water
F2080-04 Specification for Cold-Expansion
Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX)
Pipe
F2098-04 Specification for Stainless Steel
Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert
Fittings
F2135-01 Specification for Molded Drain,
Waste, and Vent (DWV) Short-Pattern Plastic Fittings
F2136-01E01 Test Method for Notched, Constant
Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE
Resins or HDPE Corrugated Pipe
F2138-01E01 Specification for Excess Flow
Valves for Natural Gas Service
F2145-01 Specification for Polyamide 11 (PA
11) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11
Pipe and Tubing
F2158-01 Specification for Residential
Central-Vacuum Tube and Fittings
F2159-03E01 Specification for Plastic Insert
Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX)
Tubing
F2160-01 Specification for Solid Wall High
Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
F2164-02 Practice for Field Leak Testing of
Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure
F2165-02 Specification for Flexible
Pre-Insulated Piping
F2176-02 Specification for Mechanical
Couplings Used on Polyethylene Conduit, Duct and Innerduct
F2206-02 Specification for Fabricated
Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock,
Plate Stock, or Block Stock
F2207-02 Specification for Cured-in-Place
Pipe Lining System for Rehabilitation of Metallic Gas Pipe
F2231-02E01 Test Method for Charpy Impact
Test on Thin Specimens of Polyethylene Used in Pressurized Pipes
F2262-03 Specification for Crosslinked
Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9
F2263-03 Test Method for Evaluating the
Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water
F2307-03 Specification for Series 10
Poly(Vinyl Chloride) (PVC) Closed Profile Gravity Pipe and Fittings Based on
Controlled Inside Diameter
F2330-04 Test Method for Evaluating the
Oxidative Resistance of Multilayer Polyolefin Tubing to Hot Chlorinated Water
F2331-04 Test Method for Determining Chemical
Compatibility of Thread Sealants with Thermoplastic Threaded Pipe and Fittings
Materials
F2389-04 Specification for Pressure-rated
Polypropylene (PP) Piping Systems
F2418-04 Specification for Polypropylene (PP)
Corrugated Wall Stormwater Collection Chambers
No comments:
Post a Comment